Acudor 24 x 24 Ladder Access Roof Hatch G3232 Galvanized Steel

$985.00
SKU:
G3232
MATERIAL:
Steel
ACCESS TYPE:
Ladder
SHIPPING:
FREE - Usually arrives in 7-10 days
Adding to cart… The item has been added
 

Acudor Ladder Access Roof Hatch Galvanized

Acudor Ladder Access Roof Hatches are designed to provide convenient, economical access to the roof of a building

RHG Features

  • Weather tight construction
  • Convenient one-hand operation
  • 12" high insulated curb
  • Supports 40lbs./sq. ft. live load

RHG Optional Features

  • Stainless Steel cover, curb, and/or hardware
  • Polycarbonate domes for daylighting
  • Louvered Curbs
  • Curb Mounted Units
  • Curb pitch corrected for sloped roof
  • Higher curb heights for "green roof" applications

RHG Standard Sizes

 
CURB ID L&W
WEIGHT PER HATCH
MODEL
inches (mm)
lbs. (kg.)
G3232
24 x 24 (610 x 610)
125 (56.8)
G3238
24 x 30 (610 x 762)
130 (58.9)
G3244
24 x 36 (610 x 914)
135 (61.4)
G3838
30 x 30 (762 x 762)
140 (63.5)
G3844
30 x 36 (762 x 914)
155 (70.5)
G4444
36 x 36 (914 x 914)
170 (77.3)
 

Specifications

Cover
Double-skin construction (“in box type design”) with 1" cellulose insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of load of 40lbs./sq. ft., the cover is 14 gauge galvanized steel with a 22 gauge galvanized steel inside liner.
Curb
14 gauge galvanized steel with 1" thick fiberboard roof insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.
Hinge
Heavy duty galvanized steel pintle hinges with 3/8" pin
Opening
Gas spring operators allow cover to open and close with ease. Inside pull handle allows for easy control when closing cover.
Door Latch
Self latching, zinc plated outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions.
Finish
Material is prepared with an iron phosphate wash, followed by a rust inhibiting primer, and then a baked on polyester enamel grey paint.