Acudor 30 x 30 Ladder Access Roof Hatch G3838 Galvanized Steel

$1,103.00
SKU:
G3838
MATERIAL:
Steel
ACCESS TYPE:
Ladder
SHIPPING:
Free Shipping (Arrives in 5-7 Days)
Adding to cart… The item has been added
 

Acudor Ladder Access Roof Hatch Galvanized

Acudor Ladder Access Roof Hatches are designed to provide convenient, economical access to the roof of a building

RHG Features

  • Weather tight construction
  • Convenient one-hand operation
  • 12" high insulated curb
  • Supports 40lbs./sq. ft. live load

RHG Optional Features

  • Stainless Steel cover, curb, and/or hardware
  • Polycarbonate domes for daylighting
  • Louvered Curbs
  • Curb Mounted Units
  • Curb pitch corrected for sloped roof
  • Higher curb heights for "green roof" applications

RHG Standard Sizes

 
CURB ID L&W
WEIGHT PER HATCH
MODEL
inches (mm)
lbs. (kg.)
G3232
24 x 24 (610 x 610)
125 (56.8)
G3238
24 x 30 (610 x 762)
130 (58.9)
G3244
24 x 36 (610 x 914)
135 (61.4)
G3838
30 x 30 (762 x 762)
140 (63.5)
G3844
30 x 36 (762 x 914)
155 (70.5)
G4444
36 x 36 (914 x 914)
170 (77.3)
 

Specifications

Cover
Double-skin construction (“in box type design”) with 1" cellulose insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of load of 40lbs./sq. ft., the cover is 14 gauge galvanized steel with a 22 gauge galvanized steel inside liner.
Curb
14 gauge galvanized steel with 1" thick fiberboard roof insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.
Hinge
Heavy duty galvanized steel pintle hinges with 3/8" pin
Opening
Gas spring operators allow cover to open and close with ease. Inside pull handle allows for easy control when closing cover.
Door Latch
Self latching, zinc plated outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions.
Finish
Material is prepared with an iron phosphate wash, followed by a rust inhibiting primer, and then a baked on polyester enamel grey paint.